Ceramic liners can lift availability, but the right answer depends on duty, not branding. Before committing, consider where the equipment sits, what flows through it and maintenance. Temperature, chemistry, particle behaviour and cleaning routines shape a durable specification.
Read the Environment Before the Brochure
Cement, chemical and mining services pose challenges. Confirm temperature bands and humidity and identify corrosive species that could weaken adhesive bonds or joints.
Choose Alumina Content for the Real World
Alumina level governs hardness and thermal stability. Higher grades can last longer, yet brittle failure may result if impact is underrated. Balance performance with downtime risk and whole-life cost. In many plants, ceramic wear protection pays back. Ensure selection and installation suit the measured duty. The right ceramic wear protection is specified by evidence, not hope.
To learn more about ceramic wear protection, consider reaching out to an expert such as https://www.kingfisher-industrial.com/wear-protection/ceramics/.
Match the Liner to the Duty
Operating speed, particle size, drop height and pressure decide whether impact, sliding abrasion or erosion dominates. High-impact duties need thicker sections and tough tile geometry. Sliding abrasion prefers fine grained, tightly sintered bodies. Compare options, such as ceramic liner options, and insist on test data under conditions close to yours.
Get Fit, Bonding and Size Right
Misfit creates gaps where turbulence and fines attack steelwork. Survey the substrate, choose pre-engineered panels or accurately cut tiles. The bonding system must match heat, vibration and clean-down methods. Mechanical fixing plus adhesive can work when preparation is meticulous and cure times are respected.
