A Jaxxon neck chain is a beautiful accessory that can add some serious style and flair to any outfit. However, over time these necklaces can lose their luster and start to look dull if not properly cared for. Cleaning your Jaxxon chain regularly is important to keep it looking its best. Here’s an in-depth guide on how to clean your Jaxxon neck chain and maintain its brilliance.
Supplies You’ll Need
Cleaning your Jaxxon chain doesn’t require anything too complicated. Here are the basic supplies you’ll need:
- Mild dish soap or jewelry cleaner
- Warm water
- Soft-bristled toothbrush
- Microfiber cloth
- Small bowl
- Foil or towel
You likely already have most, if not all, of these items at home. When cleaning your Jaxxon chain, avoid using chemical jewelry cleaners or anything too abrasive. The mild dish soap and soft toothbrush method is gentle yet effective. If you’re considering Jaxxon vs GLD for your next jewelry purchase, it’s essential to weigh the unique features and styles offered by each brand.
Step 1: Remove Your Necklace
First things first, remove your Jaxxon chain from around your neck and lay it out on a flat surface. Make sure there are no tangles or knots. You want the chain to lay as flat and straight as possible to allow for easy cleaning access.
Be very gentle when removing the chain to avoid damaging the clasp or any links. It’s best to clasp it behind your neck then lift it up over your head. Handle the Jaxxon chain delicately and avoid pulling too hard.
Step 2: Make a Cleaning Solution
Next, it’s time to prep a cleaning solution. Fill your small bowl with warm water. Avoid using hot water as this can potentially damage the metal.
Add a small drop of mild dish soap or jewelry cleaner into the water. Only use a tiny bit – you don’t need a lot of suds. Too much soap or cleaner can leave a residue.
Gently swirl the water to mix it up into a soapy solution. Your cleaning solution is now ready for washing your chain!
Step 3: Soak the Chain
Now it’s time to let your Jaxxon chain soak. Place the chain into the soapy water bowl and let it sit for 5-10 minutes.
As it soaks, the warm soapy water will help loosen up and dissolve any dirt, oil or grime on the chain. This makes the cleaning process much easier.
Periodically swirl the chain around gently to ensure it soaks evenly. Make sure every part of the chain is submerged in the solution.
Soaking allows the soap to penetrate into crevices of the links to lift away debris. Be patient during this step.
Step 4: Scrub With a Toothbrush
After soaking comes scrubbing. This is where you’ll need your soft-bristled toothbrush. Take the wet chain out of the water and lay it flat on your foil or towel. Begin gently scrubbing the chain with the toothbrush.
Apply light pressure and slowly brush across every link, including along the sides and underside. This agitation helps remove stubborn dirt and grease.
Continue scrubbing the entire surface area of the chain. Flip it over periodically to access all sides. Rinse the toothbrush in water if needed.
Step 5: Rinse Thoroughly
Once you’ve thoroughly scrubbed all over, it’s time to rinse. Hold the Jaxxon chain under warm running water to rinse away all soap residue and lift out dirt.
You may need to rinse for a couple minutes to ensure there are no suds left behind. Be sure to rinse both sides of the chain.
Shake the chain around a bit to remove excess water droplets. Don’t rub it dry with a towel, as this can cause scratches. Allow it to air dry completely.
Step 6: Inspect and Polish
Lay your Jaxxon chain flat once again and inspect it closely. Make sure there are no leftover suds or dirt spots you may have missed.
Use your microfiber cloth to gently buff and polish the chain. This brings back its shine and luster. Carefully polish each link all over.
If needed, you can scrub an extra time with the toothbrush and rinse again to remove any remaining dirt. Thorough drying and polishing is key.
And that’s it! Just repeat this cleaning process regularly to keep your Jaxxon neck chain looking like new.
Tips for Proper Care
Follow these tips in between cleanings to maintain the brilliance of your Jaxxon chain:
- Store inside a jewelry box or pouch to avoid tangles or scratches
- Apply lotion, perfume, makeup, etc. before putting on your chain
- Take off necklace before swimming, showering or strenuous activity
- Handle gently and avoid pulling hard when putting on/taking off
- Use a polishing cloth weekly to maintain shine
- Have it professionally cleaned once a year
How Often Should You Clean It?
How frequently you should clean your Jaxxon chain depends on how often you wear it and what types of environments it’s exposed to. Here are some general guidelines:
- If worn daily, clean every 1-2 weeks
- If worn frequently but not daily, clean every 2-4 weeks
- If worn occasionally, clean every 1-3 months
- Clean immediately if exposed to lotions, hair products or perspiration
More frequent cleanings may be needed if your chain comes in contact with dirt, oils and sweat often. Use your best judgment based on wear.
Can You Use Jewelry Cleaner?
Yes, you can use a store-bought jewelry cleaner solution to clean your Jaxxon chain if you prefer. Opt for a mild, non-acidic formula free of ammonia and other harsh chemicals.
Make sure it is specifically intended for gold, silver and other sensitive metals. Carefully follow the product directions.
Soak the chain in the solution for a few minutes then scrub with a soft brush. Rinse thoroughly. Jewelry cleaner can offer a deep clean, but be cautious with chemicals.
Avoid Harsh Household Cleaners
It’s best to steer clear of household cleaners when cleaning your necklace. Chemicals like bleach, alcohol, acids and ammonia can potentially damage the metal and finish.
Stick to mild dish soap or a gentle jewelry cleaner. Never use abrasive scrubbers or anything that could scratch the surface. Play it safe with your cleaning solutions.
Be Cautious With Bathing and Swimming
You’ll want to refrain from wearing your Jaxxon chain while bathing, swimming or doing any vigorous activity where it could get excessively wet.
The motion of swimming or showering can cause crevices of the links to fill with soap, shampoo, chlorine and other residue that gets difficult to remove.
Chemicals from pools can also penetrate the metal and cause discoloration or damage over time. Take off your chain before getting wet.
Don’t Forget About the Clasp
When cleaning your necklace, pay close attention to the clasp area. This part often gets overlooked but can accumulate just as much dirt and buildup.
Use your toothbrush to gently scrub around the clasp connection and mechanism. Rinse very thoroughly. This ensures the clasp functions properly.
Adding a Protector Can Help
Using a metal protector or sealant after cleaning can help keep your Jaxxon chain looking pristine between wears. These provide an invisible barrier.
Carefully apply the protectant with a soft cloth and buff with a clean microfiber towel. This adds a layer of protection from dirt, oils and other contaminants.
How to Store Your Chain Properly
Proper storage between wears is also key for maintenance. Here are some storage tips:
- Hang neatly on a jewelry stand or hook. Avoid bunching or knotting.
- Place inside a jewelry box lined with soft fabric or velvet. Separate from other pieces to avoid scratching.
- For travel, keep in a zippered pouch or jewelry roll. Use segmented compartments if available.
- Store in a cool, dry place away from direct sunlight and humidity. Avoid extreme heat or cold.
Proper storage keeps the chain untangled and free from damage when not being worn. Use care when handling and putting away.
Be Aware of Tarnishing
Tarnishing is when the silver turns dark due to a reaction with sulfur or hydrogen sulfide in the air. This can make a Jaxxon chain look dirty and dull.
To reduce tarnishing, store your chain away from rubber, wool and paper that emit sulfur. Polishing it frequently also helps prevent buildup.
If discoloration does occur, your standard cleaning should restore the shine. Severe cases may need a tarnish remover solution or professional dip.
Seek Professional Care if Needed
While home cleaning is typically effective, it’s a good idea to have your Jaxxon chain professionally cleaned by a jeweler every 6-12 months.
Jewelers use specialized equipment like ultrasonic cleaners to deep clean crevices and remove built up grime. They also can perform maintenance checks, assess for damage and replate worn finishes.
Seeking professional care helps extend the life and maintains the integrity of your chain. Look for jewelers experienced in working with delicate chains.
Having a professional evaluation periodically gives you peace of mind that your necklace is in optimal shape. They’ll clean all areas thoroughly and examine the clasp and links.
Know When to Repair or Replace
With regular care and cleaning, a quality Jaxxon chain should last for years. But constant wear will eventually take its toll.
Look out for signs your chain may need repair or replacement:
- Missing links or broken connectors
- Clasp not closing properly
- Fractured or bent links
- Discolored sections that don’t polish out
- Kurled or twisted areas
- Wear on the finish or plating
If damage is minor, a jeweler may be able to resolder links or repair the clasp. But if multiple issues arise, you may need a entirely new replacement chain.
Caring For Your Jaxxon Chain Pays Off
While it takes some diligence, properly cleaning and caring for your Jaxxon neck chain will keep it in excellent shape. The time invested pays off with a brilliant, lustrous accessory you can enjoy and feel confident wearing.
Treat your chain with care, clean it routinely, and store it properly when not being worn. With some simple maintenance, your Jaxxon necklace will stay in flawless condition and remain a treasured piece of jewelry for years to come.
Frequently Asked Questions
How can I make my cleaning solution at home?
Mix warm water with a small amount of mild dish soap or jewelry cleaner in bowl. Use about a 1-2 drops of soap per cup of water. Swirl to dissolve. Soak chain, then scrub with soft brush.
What is the best way to dry my chain after cleaning?
Allow the chain to air dry fully laid out on a towel. Do not rub with a towel or cloth. Once dried, you can polish with a microfiber cloth.
Is it safe to clean my Jaxxon chain in an ultrasonic jewelry cleaner?
Yes, ultrasonic cleaners are safe and effective for cleaning chains. Fill with distilled water and jewelry cleaner solution. Follow directions based on chain metal type. Rinse thoroughly after.
Can I use bleach, hydrogen peroxide, or ammonia to clean my necklace?
No, avoid harsh household chemicals like bleach, peroxide, and ammonia as these can potentially damage the metal. Stick to mild dish soap or jewelry cleaners only.
How often should I have my chain professionally cleaned?
Aim to have your Jaxxon chain professionally cleaned by a jeweler every 6 to 12 months. This deep cleans and you can have them inspect for any damage need repair.
Caring for your Jaxxon neck chain does require some simple maintenance, but taking the time to properly clean and store it will help the chain last for many years. Discover the enchantment of mirrored jewelry boxes as you unlock the magic of organizing your precious gems with style. Always use mild soap, water, and soft brushes when cleaning, and seek professional care periodically for a deep clean. With routine TLC, your cherished jewels will maintain their brilliant shine and sophistication.